General purpose lab ware

Connectors and tubes

"L"untapered

Excellent chemical and temperature resistance. With serrations to hold tubing tightly and prevent slipping.

Excellent chemical and temperature resistance. With serrations to hold tubing tightly and prevent slipping.

4 way connectors

Excellent chemical and temperature resistance.
With serrations to hold tubing tightly and prevent slipping.

Inlet and outlets have different diameters.

Disconnectors - tapered These quick disconnectors are useful for joining tubing of glass, rubber or plastic. Connectors fit tightly together. Replaces expensive adapters.
 

Useful for any tubing system and vacuum line.

Inlet and outlets have different diameters.

lnlet and outlets have different diameters.

For normal laboratory use, acids and solvents resistant, except benzole and similar.

Excellent resistance to acids, bases and solvents. Temperature up to 260°C. Autoclavable

Flexible, transparent, FDA, USP, Class VI, A 50~60 approved. Max temperature: +200°C/-60°C
 

Used for the passage, of gases or non corrosive liquids, medium concentrations acids, max temperature +70°C/-35°C
 

Flexible and trasparent tubing manufactured in atoxic material, suitable for liquids transfer. Cadmium free. Max temperature: +50°C/-5°C
 

Tubings with cloth impression surface. Suitable for air, water, medium concentration acids and alcaline solutions, abrasive products, oxygenized solvents etc. Max temperature: +70°C/-40°C

ldeal for drying gases. The two ends have push - on tapered connections to take rubber of 8,9,10 mm diameters.
 

Tubing with smooth and trasparent surface, density 0.92.
Autoclavable.
 

lsoflex laboratory tubing

Autoclavable PVC tubing, transparent non toxic; non aging and non oxiding. Supplied in 20 metre rolls packed in PE bags. The tubing is marked every metre for ease of use

Standard taper 1:10 ensuring perfect sealing action. Hose adapters  8 mm  - Lenght 20 mm.

For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec. Max 2 bar pressure. Not to be used with corrosive fluids or over 85°C. Can be used with gases.

For liquid flow from 50 ml/min. in horizontal position, and 140 ml/min. in vertical position. Minimum air flow 3 litres/min. horizontal and 8 litres/min. vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over 50°C.

ldeal for liquids and gases under low pressure (operating pressure 0,5 bar) or low vacuum. HDPE body interfaces with Polypropylene tap giving a smooth turning action requiring no lubricants. All are straight bored.

Suitable for Pellet burettes and charging or for vaporizers.

Synthetic Rubber

 

Suitable for automatic burettes and flash-chromatography columns.
 

Suitable for Ranvier dropping tubes and Pasteur pipettes.

Tubing selector gives nominal O.D. and l.D. of tubing. Use to determine 'grip' for connectors.