Fluoroware

Supple connectors

Specially designed to connect glass tubes with ends bent in various ways. Chemically inert. Taper according to DlN 12242 Standard.
 

Superior chemical mechanical and heat resistance. Can be used safely for continuous service at temperatures up to 250°C.

Stirrer blades for ballon flasks

Fit all standard button tip stirring shafts. "L.ong groove" keyhole ( 9 mm ) provides easy insertion into flask neck and proper position for stirring action. Can be used continuously at temperatures up to 250°C and, for short intervals, to 300°C.

magnet PVC coated

Stirring bars oval

magnet PVC coated
 

magnet PVC coated

Triangular stirring bars, magnetic

magnet PVC coated

magnet PVC coated

Stirring bars retrievers, magnetic

magnet PVC coated

 

magnet PVC coated

Rigid, light and unbreakable. The ideal replacement for glass rods.

White, one piece rod with flattened ends forming two small spatulas.

The Blades are made of chemically resistant polypropylene and are fixed to a steel rod covered with PVC with a diameter of 8 mm x 350 mm long.

magnet PVC coated

Stirring bars, magnetic with pivot ring

magnet PVC coated

 

Lining for glass tapers

Specially designed to prevent machined glass joints from binding. Conforrns to DlN 12242.

Tapered stoppers

Excellent chemical and temperature resistance. Self-lubricating. Standard taper: 1:10. According to DlN Standard 12242
 

Excellent chemical, mechanical and heat resistance. Will withstand temperatures continuously up to 250°C and for short intervals up to 300°C.
 

Sample containers

With screw cap (PFA) for sample collection, transport and storage of samples.
 

Capsules

DlN 12348 (Glass) with standard ground socket. For rotary evaporators and distillation of fine chemicals. For use under vacuum.

Bottles made of transparent fluorinated resin (Polytetrafluoroethylene - Perfluoropropylene) with high temperature and chemical resistance (-200°+250°C). A special sealing lip on the cap has been developed for these bottles to ensure a leakproof closure.

Narrow neck bottles

Bottles made of transparent fluorinated resin (Polytetrafluoroethylene - Perfluoropropylene) with high temperature and chemical resistance (-200°+250°C). A special sealing lip on the cap has been developed for these bottles to ensure a leakproof closure.

Wide neck bottles

Bottles made of transparent fluorinated resin with high temperature and chemicai resistance (250° + 270° C). Provided with leakproof closure.
 

Graduated beakers transparent, made of PFA (Perfluoralkoxy), a fluorinated resin with high chemical and heat resistance        (-250°+270°C).

Evaporating dishes

With snap on lid (PE) for contamination free sample preparation.

Excellent chemical, mechanical and heat resistance. Can be used safely for continuous service up to 250°C. Particularly suitable for dissolutions and digestions with acids and corrosive agents.
 

Beakers

Excellent chemical, mechanical and heat resistance. Will withstand temperatures continuously up to 250°C and for short intervals up to 300°C.
 

Excellent chemical, mechanical and heat resistance. Can safely be used continuously up to 250°C. Particularly suitable for dissolutions and digestions with acids and corrosive agents. All PTFE bottles include screw caps and inserst, made of PTFE.

Narrow neck, transparent wash bottles with delivery tube made of FEP highly resistant to temperature and chemicals. The tip in the swan neck tube may be cut back to increase the flow.

Volumetric flasks

Volumetric flask made of transparent fluorinated resin with high chemical and temperature resistance (-250°+270°C), with standard NS stoppers in PTFE. lndividually calibrated ringmark according to DlN 12664, class "B", Standards.

Sample tube

With calibrated ring mark at 10 ml, with screw cap (PFA) GL 25. For samples preparation, centrifugation and for Autosampler racks (Diam 25 mm).